Installation of Smart Bottle System

[spudsmckenzie]

Hi Intermountain

I am a licensed master plumber. One of my customers asked me to install a "Smart Bottle System" that seems to have come from your company. Do you have a installation guide for it that you can send me ?

Thanks

Steve

[greg-cws]

System Installation & Start-up Guidelines


Clear the installation area and carefully sweep the floor where the system will be installed.

Test home water pressure and make sure it is 50 – 75 psi static. A code-compliant pressure
regulator must be installed to protect the system on all municipal water installations.

Check to confirm that the water heater has adequate heat expansion protection to protect the system
from hot water damage.

Connect to house plumbing using code approved methods & materials and ensure that a bypass
device is installed.

Install surge protector or uninterruptable power supply.

Install ½” poly pipe or equivalent to the system drain fitting and terminate to sewer drain in a code-approved manner.

Bypass System.

Run bathtub cold to purge piping of debris and chemical residue from installation, this will
take approx. 15 minutes at 3gpm.
Leave bathtub running and slowly open the inlet valve to the system.

Slowly open the outlet valve from the system.

Observe flow of water from the bathtub. Water will become a dark brown/black color. This
color is caused by the system disinfectant/preservative as well as dust from shipping &
handling. Allow water to run until clear. Observe water for particles. If resin or chlorgon
particles are found in the water, bypass the system and call tech-support.

Turn off bathtub cold

Press the star button to enter programming mode

Program the system according to the programming instructions in this manual

Short cycle the system by stepping it through each cycle step

Observe the system during each cycle and advance to the next cycle by pressing
the fountain button.

Once the system has been advanced to normal operating mode, test the water at any faucet
that is filtered by the system to ensure proper output water quality.

[ion_avenger]

Hey Greg, can you post something about installing Smart Bottles in twin, triplex & quad configuration ?
I've got a couple of installs coming up with multiples for high flow.

Thanks